At the 1000 in 2010 I noticed cracks in the stud areas on my front hubs. 3-4 on each hub had cracks... They are rear Speedway Engineering hubs that were drilled for 5x5.5 spacing and I think the hubs aren't big enough for that spacing because there isn't much aluminum in that area.
Nate at Blitzkrieg Motorsports took a set of his 7200 hubs and made the bearing spacing work with my spindles. I've been running the BMS hubs ever since.
Nate at Blitzkrieg Motorsports took a set of his 7200 hubs and made the bearing spacing work with my spindles. I've been running the BMS hubs ever since.