Junior
Active Member
So, back to the Nine... we took the housing, hogs head, axles and all to Pro Gear in San Diego. Those guys do nothing but rear ends on every vehicle you can imagine. As discussed earlier, we tacked everything that needed to be welded but refrained from burning anything in knowing that we would certainly twist and bend the housing, if it was even straight to begin with. Pro Gear has the fixtures and tools to get it straight and keep it straight while they do all the welding. These guys located and welded on the disk brake calipers, welded the spring perches, welded on the housing and took the time to ensure the hogs head was within spec. They even popped in new axle seals and installed a new pinion seal and nut just because. Great guys, highly recommended!